Large air separation FAQ - DEAR Air Separation

What kinds of water cooling towers are available for large air separation plant？

A water cooling tower is a hybrid heat exchanger. The purpose is to cool the air after the temperature of the cooling water in the cooling tower to make the water temperature down, in order to be used for air cooling tower cycle. Different types of water cooling towers are seeking to enhance heat transfer, improve the cooling effect, while the flow resistance to be as small as possible, so that the water is ...

Jan 04, 2022

Advantages of Turbomachinery of large air separation plant

Advantages of Turbomachinery Dear Air Separation process simulation, 3D design, stress analysis, safety analysis and other software are among the best in the world, providing users with quality and advanced design services. Compared to piston expanders, turbine expanders have many advantages: the efficiency of turbine expanders is higher than that of piston expanders; when turbine expanders work, gas can pass through continuously and at high speed, and the smaller size can expa...

Dec 31, 2021

Water ingress accidents in large air separation plant

Before using the molecular sieve purifier, in order to reduce the temperature of the process air, the air must first enter the air-cooling tower for cooling. In the air cooling tower, the air enters from the bottom and is led from the top of the tower into the molecular sieve purifier, water is sprayed from the top of the tower to contact and mix with the air to cool the air, the air cooling tower is equipped with a number ...

Dec 30, 2021

The infuser of the expander of large air separation plant

The infuser nozzle of the expander commonly has two kinds, tight type nozzle and shrinkage expansion type nozzle, the gas flows through the nozzle, due to the shape of the nozzle will cause the flow rate of the gas to increase, the gas in the infuser does not receive external work, the kinetic energy increase can only rely on the consumption of internal energy, so the gas temperature will be reduced. For the gas, the pressure decreases, the volume flow rate also incr...

Dec 29, 2021

Subcooler in the cold box

Dear Air Separation is committed to scientific and technological research and development, always adhere to the quality-based, technology-led, and strive to create greater value for our customers and promote the healthy and healthy development of the industry. Regardless of what kind of air separation process, there is a cooler set up in the cold box, because the cooler can be nitrogen, dirty nitrogen gas and other cold air streams of cold recovery, so...

Dec 27, 2021

The characteristics of air separation plant export trade

Gas separation equipment exports have developed from the original export of only small and medium-sized air separation equipment to a full range of products, as large as 120,000 m³/h air separation equipment, including foreign-funded enterprises have 150,000 m³/h air separation equipment exports of product varieties from only air separation equipment, expanded to pure nitrogen equipment, liquid equipment, natural gas liquefaction devi...

Dec 23, 2021

Blade shapes for centrifugal compressors in large air separation plant

Centrifugal compressor blade shape has a dollar wheel, binary wheel and ternary wheel. One element wheel has no twist, simple manufacturing, but the blade resistance loss is large, low efficiency, has been eliminated by the current centrifugal compressor used. Binary vanes are non-spatially twisted. Ternary blade surface twist for space twist, ternary surface is also divided into two kinds, space surface of the bus for straig...

Dec 21, 2021

What requirements and regulations should be met for the assembly of small air separation unit and large air separation plant？

Air separation plant assembly gauge tube shall meet the following requirements. 1．The gauge tube should be degreased and should be assembled without pressure testing. the gas gauge tube (such as the pressure gauge tube) should not be in contact with cold equipment or cold tubes, and the distance should n...

Dec 17, 2021

Features of the gas separation import trade in China

After years of hard work and innovation, the technical level of Chinese products in the gas separation equipment industry has reached the advanced level and has a certain status in international trade. China's small air separation unit, variable pressure adsorption equipment has basically achieved domestic production, no longer rely on imports, large, very large air separation unit (mainly 60000 m³/h) and some imports, a...

Dec 10, 2021

Principles of heat exchanger channel allocation and arrangement of large air separation unit

The arrangement and distribution of multi-stream heat exchanger channel directly affect the heat transfer effect, and also the key to the design and manufacture of multi-stream heat exchanger and difficult point. All designs should follow certain principles and should not be designed at random. The general principles are: the same wall of the heat exchanger on both sides of the temperature as close as possible; the same flu...

Dec 03, 2021

Safety problems in contact with oxygen

Oxygen is a colorless, odorless, tasteless gas. It's a combustion aid. It can be mixed with combustible gases (acetylene, methane, etc.) in a certain proportion to form explosive mixture. When the oxygen concentration in the air increases to 25%, the active combustion reaction can be excited; When the oxygen concentration reaches 27%, a Mars can develop into a lively flame. Therefore, fireworks should be strictly prohibited in the oxygen workshop a...

Nov 19, 2021

Principles of air purification

Nov 19, 2021

1...10 11 12 13 14 15 16 17...24

Didn’t find the problem encountered?
Please contact live chat or email for quick help.

Chat online service@dearast.com