当前位置: Home / Faq / Large air separation FAQ /

Blade shapes for centrifugal compressors in large air separation plant

Blade shapes for centrifugal compressors in large air separation plant
Dec 21, 2021
Author: DEAR AST

Centrifugal compressor blade shape has a dollar wheel, binary wheel and ternary wheel. One element wheel has no twist, simple manufacturing, but the blade resistance loss is large, low efficiency, has been eliminated by the current centrifugal compressor used. Binary vanes are non-spatially twisted. Ternary blade surface twist for space twist, ternary surface is also divided into two kinds, space surface of the bus for straight line straight surface impeller and space surface of the bus is not straight free surface impeller. Ternary impellers are difficult to manufacture, but with low flow resistance and high efficiency, they are widely used in modern centrifugal compressors.

Dear Air Separation small air separation unit and large air separation plant have advanced technology and strong research and development capabilities that are in line with international standards, thanks to the long-term cooperation with the Chinese Academy of Sciences and the Japanese Taiyo Nippon Sanso. The company has made rapid progress in process design, manufacturing, installation and commissioning.

11

DEAR Air Separation Solve YourBlade shapes for centrifugal compressors in large air separation plantYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top