当前位置: Home / Faq / Large air separation FAQ /

Principles of air purification

Principles of air purification
Nov 19, 2021
Author: DEAR AST

In addition to dust, there are also water, carbon dioxide and hydrocarbons in the feed gas, which are removed by molecular sieve purification system. The purpose of removing impurities is as follows:

1. Prevent impurities from blocking and freezing on equipment and pipelines. Affect the normal operation of the device;

2. Prevent the equipment from being corroded;

3. Remove the dangerous explosives that threaten the safe operation of cryogenic equipment. Therefore, gas filtration, precooling and purification equipment is an indispensable part of the air separation unit.

 

DEAR Air Separation has a number of patented technologies, of which two ultra-low discharge pressure energy-saving patents belong to the domestic leading level, which can reduce the energy consumption of biogas purification equipment by 5% - 15%, and save operating costs.

 

The remote intelligent monitoring system independently developed by DEAR Air Separation enables the whole process intelligent management of equipment field and remote monitoring terminal, early detection and early warning of faults, and saves the labor cost of field operators.

 

DEAR Air Separation has invested a lot to build an intelligent production workshop to ensure that the product quality is close to zero defects, improve the accuracy of biogas purification equipment and shorten the scheduled cycle.

1

DEAR Air Separation Solve YourPrinciples of air purificationYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In medium and large air separation plants, the purification system is an important part when separating oxygen, nitrogen and argon from air. The purification system commonly uses molecular sieve adsorbent to adsorb moisture, carbon dioxide, hydrocarbons, etc. in the air. The molecular sieve purification system plays an important role in the air separation equipment process to ensure safety. The molecular sieve purification system is generally composed of adsorber, electric heater, pipeline, val...
2025.12.12
When the exhaust temperature of the piston compressor is higher than the design value, the most direct impact is that the lubricating oil is carbonized, which leads to the compressor parts burned out because of not getting good lubrication. If the temperature of the compressor is too high during actual operation, the cause should be analyzed in time and corresponding preventive measures should be taken. The following methods can be used for reference in practice. 1. Reducing the inlet air temperature can directly reduce the exhaust temperature. Check the intercooler to ensure the cooling effect of the intercooler. 2. The installation of the valve and the selection of the spring should be standardized to ensure the normal operation of the valve and minimize the loss of inlet and outlet pressure. 3. Strengthen the cooling of cylinder to ensure the normal compression process index. 4. Internal leakage is the main reason for the increase of exhaust temperature. 5.For multist
2025.12.11
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top