The three-point temperature of the low temperature of the air separation tower is: T3 temperature refers to the temperature before the high pressure a...
To eliminate the vibration of the compressor, we generally start from the following ways: 1. The static balance and dynamic balance of moving parts s...
Cause and elimination method of oil leakage failure of air compressor of air separation plant: There are three types of common failures in the use of...
The carbon molecular sieve of Nitrogen generator has high requirements on the quality of compressed air, while the compressed air contains a large amo...
Core tips: answer: 1. the manufacture, inspection and acceptance of the lower distillation column comply with the provisions of JB/T2549-1994 "aluminu...
The content of oxygen in liquid and liquid in the air separation plant is high, which will cause the increase of oxygen concentration in local range a...
Water cooling tower is a hybrid heat exchanger. The relatively high temperature cooling water (about 35℃) from the air cooling tower flows down from t...
The distillation column is an air separation equipment equipped with multi-layer tower plates (the working principles of the sieve Tower and the packi...
During the process of storage and transportation, the liquid storage tank should pay attention to: 1) the protective equipment and instrument of the s...
When the whole low pressure oxygen generator encounters emergency power failure, the first task is to open the air release valve at the end of the air...
The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does...
When the power supply of the air separation unit of the molecular sieve adsorption purification process is resumed after the power failure, the operat...
