当前位置: Home / Faq / Small air separation FAQ /

What safety matters should be paid attention to when the air separation plant is discharging low temperature liquid when parking?

What safety matters should be paid attention to when the air separation plant is discharging low temperature liquid when parking?
May 16, 2023
Author: DEAR AST
Question Reply

Air separation equipmentThe oxygen content in liquid oxygen and liquid air is high, which will cause the increase of oxygen concentration in local range after evaporating in the air. If there is fire, there will be the danger of burning and explosion. A fertilizer plant once had an explosion accident that hurt people because a large amount of liquid oxygen was discharged into the trench, and it also encountered electric welding sparks. Therefore, it is strictly prohibited to discharge the liquid into the trench at will, and it should be discharged into the liquid steam tank or the special low temperature resistant metal discharge pit through the pipeline.

The discharge pits should be kept clean regularly, and organic matters or oil deposits are strictly prohibited. When discharging liquid, fire is forbidden around.

Low temperature liquid contacting with skin will cause severe frostbite. If it is light, the skin will form blisters, red and swollen, which will cause pain; if it is severe, it will freeze the internal tissues and bone joints. If it falls into eyes, it will cause eye damage. Therefore, avoid touching the liquid directly with hands when discharging the liquid, and wear dry cotton gloves and protective glasses when necessary. In case of touching the skin, wash it with warm water (below 45℃) immediately.

DEAR Air Separation Solve YourWhat safety matters should be paid attention to when the air separation plant is discharging low temperature liquid when parking?You can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The non-power consuming option for liquid air separation plants can be used for full liquid air separation plants,where the produced liquid is sold off. This approach is currently available for most LNG receiving stations. For air separation units with a large cold capacity, the liquid air can be pressurised to 6baA in a vacuum storage tank, and then heat exchanged through a heat exchanger, instead of the air compressor, directly into the cold box for distillation. At the same time in the cold b...
2026.03.13
1. Before connecting the pipe orifice of each container, clean white cloth shall be used to tie the orifice to prevent grease and dirt from entering. 2. When welding in the cold box and in the condensing evaporator, it is strictly forbidden for flame or arc to touch the surface of vessels and pipes. 3. The containers, valves, pipes and corresponding supports in the cold box, the surface of the cold box and the foundation surface shall not be stained with grease after installation, otherwise, degreasing treatment shall be carried out.
2026.03.12
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top