High purity nitrogen air separation FAQ

Nitrogen is the main component of air in the universal pressure conversion and adsorption equipment. It is colorless, odorless, non-toxic and non-combustible gas under room temperature and atmospheric pressure, and its boiling point is-195.8 ℃, its chemical property is not active. In addition to synthetic ammonia, nitrogen is usually used as protective gas in industries such as metallurgy, chemical industry, coal, food, medicine, electron, magnetic material, transportation, heat treatment, tire, thermoelectricity, aviation, etc. Special pressure conversion nitrogen absorption equipment for petroleum and petrochemical industry chemical industry is the industry with the largest application of nitrogen air separation equipment. Currently, the most widely used one is: PVC, with a purity of 99.5% and a large flow rate. Polypropylene (PE) has a purity of 99.9% and a large flow rate. The application of nitrogen in this product is divided into two parts. One is that 99.9% nitrogen (small am...

I. Preface With the rapid development of industry, nitrogen has been widely used in chemical engineering, electronics, metallurgy, food, machinery and other fields. The demand for nitrogen in our country increases at a speed of more than 8% every year. The chemical property of nitrogen is not active, and it shows great inertia under normal conditions, so it is not easy to react with other substances. Therefore, nitrogen is widely used as protective gas and sealing gas in metallurgical industry, electronic industry and chemical industry. Generally, the purity of protective gas is required to be 99.99%, and some require high purity nitrogen of more than 99.998%. Liquid nitrogen is a relatively convenient cold source, which is more and more widely used in food industry, medical service and the seminal storage of animal husbandry. During the production of synthetic ammonia in the chemical fertilizer industry, if the mixture of hydrogen and nitrogen, the feed gas of synthetic ammonia, is...

After the argon fraction is extracted from the top Tower, it enters into the crude argon tower and conducts the separation of oxygen and argon by the rectification method. Generally, the components of crude argon from the top of the crude argon tower are: argon is more than 98%, nitrogen is less than 0.5%, and oxygen is less than 1.5%. Import Crude argon with purity over 98% into molecular sieve adsorber. There are two adsorbers in each group. One is equipped with 5A Molecular sieve to absorb nitrogen in crude argon; the other is equipped with 4A molecular sieve to absorb oxygen in crude argon. In order to release the adsorbents, two groups of adsorbents need to be set up to switch to use. The adsorber works at the temperature of 90 K. The crude argon enters into 5A Molecular sieve adsorber to remove nitrogen first, and then enters into 4A molecular sieve adsorber to remove oxygen. The process is shown in Figure 18. The gas from a group of molecular sieve adsorbers has a purity of 9...

Core tips: the safety that should be paid attention to when touching nitrogen: nitrogen is colorless, odorless and odorless lazy gas. It itself does no harm to human body. If people absorb pure nitrogen, they will be suffocated due to severe anoxia and thus die.

Temperature of substance

Adsorption and purification of air

Why should the cold box maintain pressure

What are the steps for the naked cooling of the cooling fractionator system of the air separation unit

How to operate and manage the condensing evaporator of air separation plant

Preparation of high purity nitrogen

What are the development history, current situation and main technical problems of the purification system of air separation equipment

Problems with the liquid level gauge can occur in three ways: high, low or unstable indications.First of all, check whether the liquid level meter is leaking, pass an air source into the positive pressure chamber and block the negative pressure chamber to see if there is any air leakage. The high indication is generally due to a leak in the negative pressure chamber, which increases the differential pressure; the low indication is due to a leak in the positive pressure chamber, which decreases t...