当前位置: Home / Faq / High purity nitrogen air separation FAQ /

What issues should be paid attention to when operating the molecular sieve purification system of the air separation equipment

What issues should be paid attention to when operating the molecular sieve purification system of the air separation equipment
Oct 11, 2023
Author: DEAR AST

The purification effect of the molecular sieve purification system affects the operating cycle of the device. Improper operation of the same equipment may also affect the purification effect. The following issues should be noted during operation:

1) Installation requirements for molecular sieve adsorbers: carefully check whether the upper and lower sieve screens are damaged and whether they are firmly fixed; Whether the molecular sieve is fully filled and leveled; Carefully seal the inner and outer cylinder manholes to prevent mutual gas leakage;

2) When the molecular sieve adsorber is running, it is necessary to regularly monitor the temperature curve of the molecular sieve and the carbon dioxide content at the outlet to determine whether the adsorber is working properly;

3) Closely monitor the switching program of the adsorber and whether the switching pressure difference is normal. If there is a malfunction, it should be dealt with promptly;

4) Pay close attention to the normal operation of the refrigerator. If a short-term malfunction causes an increase in air outlet temperature, the switching cycle of the adsorber should be shortened in a timely manner and the malfunction should be eliminated in a timely manner;

5) When starting and boosting the air compressor, it should be done slowly to prevent excessive air velocity. When inflating the low-temperature system or increasing the system load (starting the expander, opening the throttle valve, etc.), it should be done slowly to prevent system pressure fluctuations;

6) When the air separation equipment is stopped, the main air valve behind the adsorber should be immediately closed to prevent excessive airflow velocity from impacting the molecular sieve bed layer during restart.

DEAR Air Separation Solve YourWhat issues should be paid attention to when operating the molecular sieve purification system of the air separation equipmentYou can also learn about otherHigh purity nitrogen air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
What's the reason for using two-stage distillation column in air separation column?Usually, the air in the lower column is pre separated by the air separation column, which is rectified into liquid air which is rich in oxygen and pure nitrogen, and then further rectified in the upper column to obtain oxygen and nitrogen products. The connection between the upper and lower columns is the condensing evaporator. It uses the pressured nitrogen of the lower column to heat the liquid oxygen in the upper column, so as to evaporate the liquid oxygen while condensing the liquid nitrogen. The advantage of using two-stage distillation column is that the product has high extraction rate, and high purity oxygen and nitrogen can be obtained at the same time. Oxygen and nitrogen products can also be produced in a single-stage distillation column, but only one product can be produced separately. It is similar to the lower column of two-stage distillation column, in which pure nitrogen product can be
2026.11.17
Answer: to judge whether the air separation unit is advanced or not, it mainly depends on three hard indicators, combined with the comprehensive evaluation of the intelligent level. 1. Core evaluation index -Unit power consumption: commonly measured in kwh/nm ³ o ɑ, it is the operating cost index that customers are most concerned about; The larger the scale and the higher the purity, the lower the unit energy consumption. -Oxygen extraction rate: it reflects the utilization efficiency of raw air. The higher the extraction rate, the more electricity is saved. The cryogenic method is usually better than the simple process. -Operation stability and load regulation range: whether the load can be changed smoothly between 30% and 110% will directly affect the ability of adaptive gas fluctuation. 2. Embodiment of the advanced nature of Deere air separation -The eighth generation of intelligent air separation technology: make system optimization in process organization and equipment matching,
2026.11.16
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top