当前位置: Home / Faq / High purity nitrogen air separation FAQ /

What safety matters should be paid attention to when checking nitrogen water precooling system?

What safety matters should be paid attention to when checking nitrogen water precooling system?
Oct 30, 2023
Author: DEAR AST
Question Reply

For the maintenance of nitrogen-water precooling system, the most important thing to pay attention to is to prevent the occurrence of nitrogen suffocating accident. There have been several lessons that maintenance workers died of nitrogen suffocating in China. During the overhaul, nitrogen is often used to warm the unit at the same time, and the heated nitrogen often flows into the cooling tower through the three-way valve of dirt and nitrogen, causing the nitrogen concentration in the tower to be too high.

Therefore, before heating the deviceAir cooling tower,Shui leng taSeparate the blind plate from the device; analyze the oxygen content in the air cooling tower and water cooling tower. When the oxygen content is 19% ~ Only between 21% can the maintenance personnel be allowed to enter; if they work in the area where the oxygen content is less than 19%, there must be someone to supervise and wear isolation masks (oxygen respirator, long tube mask, etc ).

DEAR Air Separation Solve YourWhat safety matters should be paid attention to when checking nitrogen water precooling system?You can also learn about otherHigh purity nitrogen air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Another part of the nitrogen vaporized in the liquefier is heated up to a certain temperature in the high pressure heat exchanger and pumped out to the low pressure nitrogen press, the nitrogen separated by the gas-liquid separator is also heated up by the high pressure heat exchanger and then goes to the low pressure nitrogen press, compressed to a certain pressure by the low pressure nitrogen press and then back to the high pressure heat exchanger for heat exchange with liquid air separat...
2026.04.17
Special pressure-bearing equipment generally bears internal pressure, that will cause tensile stress inside the shell, which is called working stress. The working stress is directly proportional to the pressure and diameter, and inversely proportional to the vessel wall thickness. The axial stress is half of the circumferential stress. Therefore, for cylindrical vessels, the stress of longitudinal weld is twice that of girth weld. Because the geometric shape of the spherical shell is symmetrical to the spherical center, and the axial stress is equal to the circumferential stress in numerical value. Therefore, the wall thickness of the spherical vessel can be reduced by half as much as that of the cylindrical vessel under the same pressure and diameter.
2026.04.16
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top