当前位置: Home / Faq / Biogas purification FAQ /

What are the advantages of pulse backwash self-cleaning air filters?

What are the advantages of pulse backwash self-cleaning air filters?
Apr 11, 2024
Author: DEAR AST

The domestically produced pulse type backwash self-cleaning air filter is effective for 2 μ The particle filtration efficiency is greater than 98%; The initial resistance is less than 150Pa, the normal resistance is 400-600Pa, the alarm resistance is 800Pa, and the maximum safety resistance is 1500Pa; Blowback compressed air pressure is 600-800kPa, and the flow rate is less than 0.15m3/min. The effective filtration area of each filter cartridge is 21.4m3.
The advantages of pulse backwash self-cleaning air filters include:
1. The filter cartridge has high filtration efficiency, low resistance, long service life, and can resist water mist;
2. Automatically blow back to clean dust, achieving self-cleaning. It can ensure uninterrupted operation of the air compressor for more than 2 years. Experimental results have shown that centrifugal air compressors operating continuously for 5-10 years have no obvious scaling inside, and there are no traces of dust wear on the blades;
3. Equipment maintenance is convenient and cost-effective. The filter cartridge has a long lifespan, is easy to replace, and can be replaced without stopping the machine. The filter material is high-quality waterproof paper material, which is cheap in price;
4. The pulse backwash self-cleaning air filter is a dry air filter. Compared with a wet air filter, the processing air does not contain oil and does not pose a threat to the safety of the air separation device.

DEAR Air Separation Solve YourWhat are the advantages of pulse backwash self-cleaning air filters?You can also learn about otherBiogas purification FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In medium and large air separation plants, the purification system is an important part when separating oxygen, nitrogen and argon from air. The purification system commonly uses molecular sieve adsorbent to adsorb moisture, carbon dioxide, hydrocarbons, etc. in the air. The molecular sieve purification system plays an important role in the air separation equipment process to ensure safety. The molecular sieve purification system is generally composed of adsorber, electric heater, pipeline, val...
2025.12.12
When the exhaust temperature of the piston compressor is higher than the design value, the most direct impact is that the lubricating oil is carbonized, which leads to the compressor parts burned out because of not getting good lubrication. If the temperature of the compressor is too high during actual operation, the cause should be analyzed in time and corresponding preventive measures should be taken. The following methods can be used for reference in practice. 1. Reducing the inlet air temperature can directly reduce the exhaust temperature. Check the intercooler to ensure the cooling effect of the intercooler. 2. The installation of the valve and the selection of the spring should be standardized to ensure the normal operation of the valve and minimize the loss of inlet and outlet pressure. 3. Strengthen the cooling of cylinder to ensure the normal compression process index. 4. Internal leakage is the main reason for the increase of exhaust temperature. 5.For multist
2025.12.11
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top