At present, our government attaches great importance to the work of energy saving and emission reduction, and many binding targets such as China's ene...
Cause and elimination method of oil leakage failure of air compressor of air separation plant: There are three types of common failures in the use of...
The main components in the air are nitrogen and oxygen. By selecting the adsorbents with different adsorption selectivity for nitrogen and oxygen, the...
The flow integrator is used together with the flow meter and accumulates the total amount of fluid flowing through the pipeline within a certain perio...
Before the automatic valve is installed in the automatic valve box, it must be disassembled and washed clean, and the oil must be removed with clean a...
The carbon molecular sieve of Nitrogen generator has high requirements on the quality of compressed air, while the compressed air contains a large amo...
Air compressor absorbs the external air and compresses the gas generated through the air dryer and drier. After separating the water in the air, the g...
The running cycle of small-sized air separation plant is shorter than that of large-sized air separation plant, which is because small-sized air separ...
After removing the micro metal particles and dust impurities in the air through the air filter, the air enters the svk20-3s type turbine air compresso...
Before filling the molecular sieve, check that the sieve bed can not leak the molecular sieve, otherwise it should be handled. Oil and other sundries ...
Carbon molecular sieve (CMS) is a new type of non-polar adsorbents, which has the performance of absorbing oxygen molecules in the air under normal te...
The heat capacity of the Plate-fin switching heat exchanger is small, and the start-up time of the air separation plant is short, which is 30 ~ 36 H l...
