The technical requirements of molecular sieve purifier include: 1. the manufacture, inspection and acceptance of the molecular sieve adsorption cylin...
The spacing between the tower plates determines the height of the whole distillation column. Therefore, it is hoped that the spacing between the tower...
The low temperature valve is installed at normal temperature and works at low temperature, with a wide range of temperature variation. If the design a...
Liquid air and liquid nitrogen supercooler uses nitrogen as cold source to cool liquid air or liquid nitrogen. There are Pipe type and plate type cool...
To eliminate the vibration of the compressor, we generally start from the following ways: 1. The static balance and dynamic balance of moving parts s...
Pure argon Tower and the condensation evaporator composite should be met: 1. Pure argon tower and condensing evaporator are manufactured, inspected a...
The pressure value measured by the pressure gauge reflects the pressure level, but it is not the actual pressure. According to the working principle o...
Cooling is a common name in refrigeration, refrigeration is to get lower temperature than the surrounding air, compared with the surrounding air, it h...
The technical maintenance of power equipment includes: (l) daily spot inspection and round inspection by the operating personnel of power station acco...
There must be rising steam and downstream liquid during the rectification process. Condensation evaporator is the bond connecting the upper and lower ...
Water cooling tower is a hybrid heat exchanger. The purpose is to lower the temperature of cooling water in the cooling tower after cooling the air, s...
According to different applications, nitrogen products are divided into three kinds: industrial gas nitrogen, pure nitrogen and high purity nitrogen....
