Only when the quantity and state of materials entering and exiting the distillation tower and each stock of materials completely accord with the mater...
There are mainly the following factors that affect the output of oxygen: 1) insufficient processing air volume. The reasons for the shortage of air vo...
The Feed gas and cold source of the crude argon tower come from the main tower and return to the main tower, so the crude argon Tower and the main tow...
The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the ...
In the switching heat exchanger, moisture and carbon dioxide cannot be completely and thoroughly removed. Although the remaining amount is very small,...
After the air separation equipment stops, when the equipment does not discharge liquid, the basic temperature of the cold box will be reduced to more ...
For the pipeline with pressure, the easiest problem in the production process is the leakage at the connection flange. Once leakage is found, do not t...
1) The station can only be built after the review and approval of relevant departments according to the regulations on the safety management of chemic...
The amount of expansion air entering the upper column increases, and the reflux ratio of the rectification section decreases correspondingly. In order...
Switching purification process air separation equipment refers to self-cleaning of moisture and carbon dioxide in the passageway of switching Plate-fi...
The air contains 0.932% argon. When 99.6% oxygen is to be produced from the upper tower, 1.05% argon must be contained in the nitrogen discharge. From...
As we know, in order to ensure self-cleaning of all low-voltage air separation plant, the temperature difference of cold end of switching heat exchang...
