当前位置: Home / Faq / Air separation parts FAQ /

How to prevent the cylinder burning accident of high pressure oxygen press?

How to prevent the cylinder burning accident of high pressure oxygen press?
May 14, 2024
Author: DEAR AST
Question Reply

High pressure for bottle fillingOxygen compressorHigh working pressure, improper operation and management will easily lead to cylinder burning accident. In order to prevent such accidents from happening, the following matters should be paid attention to when using and maintaining:
1) for the parts, maintenance tools and the hands of the maintenance personnel of the oxygen presser, they must be strictly skim and cleaned, and at last, they should be thoroughly cleaned with clean carbon tetrachluene. When pulling out the piston for overhaul, special attention should be paid to clear the oil stain at the bottom of the piston rod in case of stain the seal. When the sealer and oil scraper are worn, they should be replaced in time to prevent oil;
2) the distilled water used for lubrication must not be interrupted. Distilled water tank should be more than 2 m higher than cylinder head, and water level gauge and dripping device should be easy to monitor. The amount of distilled water is about 1 OKG per hour for type 2-1.67/150 oxygen compressor; about 15kg per hour for type 2-2.833/150 oxygen compressor. Repair the first and second level seal timely when it is found leaking, and replace the piston ring timely if it is stuck. To ensure that distilled water is normally and continuously brought into the third-level cylinder;
3) the center of the piston must be corrected strictly to prevent the phenomenon of grinding deviation and cylinder wiping. When the compression ratio is found to be abnormal, the fault should be eliminated timely;
4) often pay attention to the temperature of cooling water during operation, and the drainage temperature should not be more than 45℃;
5) the parts contacting with oxygen cannot be made of carbon steel. Do not change the materials specified in the drawings such as the packing seal, gasket, etc. arbitrarily. Pipeline should be clean, welding slag and sundries should be removed;
6) strengthen monitoring and management. When the pressure is abnormal, the exhaust temperature rises and the sound is abnormal, stop the car and check it timely.

DEAR Air Separation Solve YourHow to prevent the cylinder burning accident of high pressure oxygen press?You can also learn about otherAir separation parts FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
VPS VTA in small air separation unit Variable temperature adsorption is an operating method that uses the equilibrium adsorption capacity of the adsorbent to decrease with increasing temperature, using ambient temperature adsorption and rising temperature desorption in small air separation unit. Two or more adsorption towers are usually set up to operate in cycles to achieve continuous production, with one (or several) adsorbing impurities near ambient temperature and the others staggering thro...
2025.03.20
Saturation temperature and saturation pressure are terms in gas-liquid equilibrium. If it is not filled with liquid in a sealed container, part of liquid molecules will enter the upper space, which is called "evaporation ". As the number of vapour molecules in space increases, the pressure of vapour generated by it also increases. At a certain time, the number of vapour molecules in space will not increase any more. At this time, the number of molecules leaving the liquid and the number of molecules returning the liquid from Space reach a dynamic balance, which is also called "saturated state ". At this time, the pressure generated by vapour is called "saturated pressure ". For the same substance, the saturation pressure is related to the temperature. The higher the temperature is, the greater the energy the molecule has, the easier it is to get rid of the liquid and gasification, and the corresponding saturation pressure is also higher. A certain temperature corresponds to a certai...
2025.03.19
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top