1. Workers must wear safety helmets properly when entering the construction site, because the construction site is often chaotic. Some equipment insta...
The skid mounting of equipment refers to connecting the pipelines, equipment, pumps, control cabinets, electrical instruments and other components of ...
The working pressure of the high-pressure oxygen compressor used for filling bottles is high, and it is easy to cause cylinder burning accidents due t...
In the air separation plant, the main heat exchanger is the key equipment to ensure the performance of the whole set of equipment. The function of the...
The air contains 0.932% of argon. When the upper tower wants to produce 99.6% of oxygen, it must contain 1.05% of argon in the nitrogen exhaust. From ...
At the installation site of the air separation plant, we may see a variety of operation methods. We may be a little surprised when we first see it. We...
The expansion air volume entering the upper tower increases, and the reflux ratio of the distillation section decreases correspondingly. In order to a...
Leakage is the easiest failure of regulating valve during operation. Some leak at the welding place, and some leak at the sealing place of the stuffin...
Only when the quantity and state of materials entering and exiting the distillation tower and each stock of materials completely accord with the mater...
There are mainly the following factors that affect the output of oxygen: 1) insufficient processing air volume. The reasons for the shortage of air vo...
The Feed gas and cold source of the crude argon tower come from the main tower and return to the main tower, so the crude argon Tower and the main tow...
The most likely leakage of switching heat exchanger is the welding line, especially the joint of the head and the pipeline. Most of the causes of leak...
