In the commissioning process of argon production system of new air separation plant, due to unstable gas demand and other reasons, the working conditi...
The most likely leakage of switching heat exchanger is the welding line, especially the joint of the head and the pipeline. Most of the causes of leak...
After the air separation equipment stops, when the equipment does not discharge liquid, the basic temperature of the cold box will be reduced to more ...
Switching purification process air separation equipment refers to self-cleaning of moisture and carbon dioxide in the passageway of switching Plate-fi...
The process of extracting neon and helium from the air separation plant is divided into three steps: the first step is to produce crude neon and heliu...
When the small oxygen generator uses liquid nitrogen throttle to adjust the purity of liquid nitrogen, it can be found that the valve is adjusted with...
According to different applications, nitrogen products are divided into three kinds: industrial gas nitrogen, pure nitrogen and high purity nitrogen....
The main dangerous and harmful factors in workshop workplace are: electric shock, mechanical injury, lifting injury, burning, falling from high places...
Pressure dew point: after the wet air is compressed, the density of water vapor increases and the temperature also rises. When the compressed air cool...
When air enters into the cooler (or switching heat exchanger) through the last stage cooler of air compressor and nitrogen water precooler, the conten...
After removing the micro metal particles and dust impurities in the air through the air filter, the air enters the svk20-3s type turbine air compresso...
In the whole low-pressure air separation process, some are equipped with a liquid purifier, and some are equipped with two or even three liquidators, ...
