After removing the micro metal particles and dust impurities in the air through the air filter, the air enters the svk20-3s type turbine air compresso...
The heat capacity of the Plate-fin switching heat exchanger is small, and the start-up time of the air separation plant is short, which is 30 ~ 36 H l...
Core tips: answer: 1. the manufacture, inspection and acceptance of the lower distillation column comply with the provisions of JB/T2549-1994 "aluminu...
Core tips: answer: (l) the general requirements of reforming the high oil tank l) reforming the lubrication system of the centrifugal air compressor, ...
As for the oxygen generator in the flow of switching heat exchanger, in order to achieve the self-elimination of moisture and carbon dioxide, the amou...
If the automatic adjustment system of the liquid level of the air cooling tower fails, it is easy to cause water accidents of the air separation tower...
At the beginning of starting the full low pressure oxygen generator, all the air entering the equipment is inflated through the expander, while the to...
The load adjustment range of low pressure air separation plant is related to the adjustment performance of raw material air compressor, the adjustment...
The liquid in the lower tower mainly comes from the liquid flowing from the first tower plate at the bottom. The liquid flowing down from the top Towe...
Molecular sieve adsorber can adsorb water and carbon dioxide at normal temperature, and at the same time, it can adsorb hydrocarbon such as acetylene....
For the old and new pressure gauge, its precision should be verified. Special pressure gauge calibrator should be used during verification. Generally,...
The air separation equipment generally uses rivers, lakes or underground water as cooling water. This kind of water usually contains suspended solids ...
