When the air separation user's production line fails to achieve full load production and the oxygen demand is far lower than the production capacity o...
The air separation distillation column is composed of upper and lower columns, crude argon column and pure argon column and so on. At present, there a...
1. Workers must wear safety helmets properly when entering the construction site, because the construction site is often chaotic. Some equipment insta...
On the one hand, the expansion heat exchanger is to reduce the temperature of the air after expansion by utilizing the cooling amount of the sewage ni...
Small air separation equipment consists of air compressor, purifier, air separation Tower, expander, oxygen compressor and other main parts. Before st...
The low temperature valve is installed at normal temperature and works at low temperature, with a wide range of temperature variation. If the design a...
Pure argon Tower and the condensation evaporator composite should be met: 1. Pure argon tower and condensing evaporator are manufactured, inspected a...
Water cooling tower is a hybrid heat exchanger. The purpose is to lower the temperature of cooling water in the cooling tower after cooling the air, s...
With the increasingly wide application of cryogenic liquid, in order to reduce material cost, improve storage efficiency, reduce equipment floor area,...
The steam heater uses overheated steam as the heat source, so it is easy to leak and pollute the heating medium in the process of use. Therefore, the ...
