Air contains a large amount of dust, air compressor in a long time of high-speed operation, dust will cause wear and tear, corrosion and scaling of the machine's internal impeller, blades and other components, shortening the service life of the machine, so set up an air filter to remove the dust and impurities from the air.
Function:Remove mechanical impurities and dust in the air of raw materials. Structure: It consists of high-efficiency filter cartridge, venturi, self-cleaning nozzle, blowback system, control system, air outlet of air purification chamber and cabinet frame. Principle: Under the negative pressure of suction, the air passes through the high-efficiency filter cartridge, the dust is blocked due to gravity, static electricity and contact, and the purified air enters into the clean air room. The filtering efficiency can reach 99.9% for dust larger than 1UM, and the dust on the filter is blown out by special nozzle to achieve removal.
Raw air is sucked in from the suction port, and dust and other mechanical impurities are removed by self-cleaning air filter. The filtered air enters the centrifugal air compressor, and after compressed by the raw air compressor, it enters the air cooling tower for cooling. The cooling water is low-temperature water cooled by water cooling tower. The air passes through the air cooling tower from bottom to top, and is cleaned at the same time as it is cooled.
