当前位置: Home / Faq / Air separation parts FAQ /

Precautions before startup of liquid oxygen pump

Precautions before startup of liquid oxygen pump
Jan 06, 2023
Author: DEAR AST

Before starting the liquid oxygen pump, the following preparations shall be made: blow off the residual water or oxygen with normal temperature dry gas for 10-20 minutes; Short term power supply, check whether the rotation direction of the motor is correct, and reverse rotation will reduce the flow and head of the pump; Fully precool the pump, and turn the pump to check whether it can rotate flexibly; During startup, gradually open the inlet valve of the liquid oxygen pump and open the steam vent valve until the liquid oxygen is discharged.

The manufacturing of air separation equipment is a typical non standardized manufacturing industry. It is characterized by completely customized product design, huge difference in product specifications, simple process and complex process, large and heavy raw materials. Because of the above characteristics, the manufacturing of air separation equipment is still mainly manual in the world. With the concept of intelligent manufacturing of DEAR air separation plant deeply rooted in the hearts of people, the intelligent transformation of air separation plant has brought challenges and opportunities to the air separation plant industry and intelligent manufacturing industry. It can be said that if the intelligent problem of air separation manufacturing can be successfully solved, it will have an important reference significance for the technological progress of flexible manufacturing.

DEAR Air Separation Solve YourPrecautions before startup of liquid oxygen pumpYou can also learn about otherAir separation parts FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top