当前位置: Home / Faq / Small air separation FAQ /

How to judge whether there is grease in the oxygen cylinder

How to judge whether there is grease in the oxygen cylinder
Sep 27, 2022
Author: DEAR AST

Grease is a combustible substance, which will cause spontaneous combustion when contacting with compressed oxygen with pressure greater than 3MPa. If grease is stuck on the oxygen cylinder valve, the cylinder valve will catch fire or even explode when oxygen flows through the cylinder valve at a high speed during the filling and use of the oxygen cylinder. Therefore, the oxygen cylinder is strictly forbidden to be stained with grease.

The grease on the bottle valve is caused by ignoring the safety and seriously violating the safety operation rules. Oil stained hands, gloves, work clothes and tools of the operator during filling and use; It is also possible that strict degreasing treatment is not carried out during inspection and replacement of bottle valves.

The grease in the bottle may be the gas containing grease once contained in the cylinder. During the periodic inspection of gas cylinders, in order to determine whether there is grease on the inner wall of the gas cylinders, the following methods can be used: pour the water used to rinse the gas cylinders into a cup, leave it for a while, put a piece of cigarette paper on the water surface, and take it out for drying after a while. If there is oil stain on the paper, it indicates that the bottle contains grease; Pour the water for rinsing the gas bottle into the cup, and use a small spoon to take a little pure camphor powder and sprinkle it on the surface of the cup. If the camphor powder rotates strongly on the water surface, it indicates that the bottle contains oil. This is because camphor powder is insoluble in water, but soluble in oil. In the process of dissolution, the heat of dissolution will be generated to vaporize the water locally, causing the rotation of camphor powder.

DEAR Air Separation is committed to providing high-quality complete sets of air separation equipment for customers at home and abroad, and also focuses on providing various types of spare parts for air separation. It has been recognized and trusted by customers!

DEAR Air Separation Solve YourHow to judge whether there is grease in the oxygen cylinderYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Oxygen product: liquid oxygen is pumped out from the lower tower plate of the low pressure tower and sent to the storage tank, the inner compressed oxygen pump is placed next to the liquid oxygen storage tank, the liquid oxygen extracted from the storage tank is pressurized by the oxygen pump and sent out after gasification and reheating in the main heat exchanger to get the required oxygen product in liquid air separation plant. The nitrogen product is pumped from the top of the pressure tower...
2024.03.28
The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the sealing surface of the dynamic and static ring of the friction pair. It is related to the grinding quality of sealing surface, the assembling quality of pump shaft and bellows, and the material of friction pair. For the labyrinth type seal structure, it is related to the adjustment of the seal clearance and the pressure of the seal gas. Other faults and solutions are as follows: 1) the pump can't start: the current is blocked. The circuit should be rechecked to switch on the current; the rotor gets stuck or the gap is too small. The pump should be removed for inspection and the clearance should be adjusted. 2) no drainage after starting: the steering of the pump is opposite. Check the motor steering, change the power wiring; the pump is not fully precooled, gas is generated. The pump should be stopped and fully precooled again; the inl...
2024.03.27
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top