当前位置: Home / Faq / Large air separation FAQ /

Forms of braking for large air separation unit turbine expanders

Forms of braking for large air separation unit turbine expanders
Jun 20, 2022
Author: DEAR AST

In order to consume the work of the turbine expander when required, to control the speed, to maintain the expander at its maximum efficiency point and to prevent the turbine from flying, turbine expanders are equipped with braking devices. There are three forms of braking commonly used on turbine expanders, namely pneumatic, motor and booster brakes. Most large oxygen generators use motor brakes, while booster brakes are a more advanced form of braking, which can recover the work of the expander to the oxygen generator itself.
DEAR air separation technology innovation + management innovation is the AI intelligent numerical control system established by DEAR to the industry's traditional control mode of change, the company developed a remote monitoring system, with the help of Internet technology, the establishment of the total control room in our company, the traditional air separation products to add network software and hardware modules, to achieve remote control, automatic data collection and analysis and many other functions, using the company's strong technical advantages, remote control The remote control of large air separation unit has greatly improved the convenience and safety of the operation of large air separation units, small air separation units and liquid air separation plants.

梅花项目2

DEAR Air Separation Solve YourForms of braking for large air separation unit turbine expandersYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquid air separation plant system uses the cold energy to produce liquid oxygen, liquid nitrogen and liquid argon in an air separation system, including an air compression pre-cooling system, an air purification system, an air separation system and a nitrogen circulation system for liquid air separation plant cold recovery. the nitrogen circulation system for liquid air separation plant cold recovery is placed in a separate cold box from the main cold box of the air separation system. the l...
2026.08.03
In the process of operation, especially in the start-up and shutdown of the air separation unit, one-way force should be avoided on the instrument. During the start-up of the equipment, close the high pressure and low pressure valves firstly, then open the balance valve, and then slowly open the high pressure (or low pressure) valve, so that the measured medium can enter the positive (negative) pressure chamber of the transmitter. If the liquid is to be measured, the gas in the positive (negative) pressure chamber should be discharged from the upper vent. If the gas is measured, drain the liquid accumulated in the positive (negative) pressure chamber from the lower drain screw hole. After discharging the gas (liquid), close the balance valve, and then open the valve on the other side. When the equipment is shut down, the high pressure (or low pressure) valve should be closed first, then the balance valve should be opened, and then the valve should be closed on the other side. Someti
2026.07.31
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top