当前位置: Home / Faq / Liquefied air separation FAQ /

Cold energy usage process technology in liquid air separation plant 

Cold energy usage process technology in liquid air separation plant 
Dec 04, 2025
Author: DEAR AST

The raw air is compressed to about 0.52Mpa by the air compressor after filtering out dust and impurities, and then cooled to about 10℃ by the refrigerant glycol aqueous solution or Freon, and then enters the purification system to purify and remove water, carbon dioxide and other impurities in the air. Part of the raw material air enters the lower tower via the second raw material air pipeline, another part is liquefied into liquid air via the liquefier and enters the lower tower via the liquid air separation plant  pipeline, where the thermal mass is cross-condensed and evaporated, and the nitrogen, liquid nitrogen, dirty liquid nitrogen, poor liquid air and oxygen-rich liquid air are obtained in the lower tower in turn by the separation of the multi-layer tower plates.

Dear Air's high quality small air spearation unit, large air spearation unit and liquid air spearation plant have won the trust of customers at home and abroad.

山东传洋集团KDON(Ar)-1800036000-520型空分设备

DEAR Air Separation Solve YourCold energy usage process technology in liquid air separation plant You can also learn about otherLiquefied air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Why do molecular sieves in small air separation unit use bunk beds? Molecular sieve purifiers are used in both small and large air separation plants to purify the air. carbon dioxide, acetylene, and various hydrocarbons. Some molecular sieves small air separation unit use a double bed because the adsorption capacity of activated alumina is relatively large for air with high water content, but as the water content of the air decreases, the adsorption capacity decreases rapidly. The molecular s...
2026.01.29
It should contact with the front and rear processes when the piston compressor is ready to stop, we should pay attention to the following sequence: first, cut off the gas supply slowly. In order to prevent the outlet pressure from rising after the gas supply is cut off, open the vent valve at the same time. For the oxygen compressor, the vent valve should be opened slowly, because excessive opening may produce static electricity and cause fire. Then, stop the motor. After the motor stops, turn off the circulating oil pump, grease injector motor and cooling water valve. However, there are also exception cases. For example, in case of emergency shutdown, in order to save time and prevent the accident from expanding, the power supply can be cut off immediately to stop the compressor with load.
2026.01.28
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top