当前位置: Home / Faq / Large air separation FAQ /

Causes and elimination of vibration of piston type oxygen compressor in air separation unit

Causes and elimination of vibration of piston type oxygen compressor in air separation unit
Nov 25, 2020
Author: DEAR AST
Question Reply

Generally, the main reason for the vibration of piston type oxygen compressor is the action of alternating load. There are two kinds of alternating loads: one is the unbalanced inertia force, the other is the interference force caused by the strong gas pressure pulse in the gas pipeline caused by the discontinuous gas supply of the compressor.

 

The vibration caused by unbalanced inertia force can be eliminated and reduced from the structure of the machine itself. The specific methods are as follows: reasonably arrange the crank stagger angle; properly select the mass configuration of reciprocating parts. In addition, the basic design and manufacturing process of the compressor should also strictly comply with the technical specifications.

 

For the vibration caused by air flow pressure pulse, a buffer can be installed near the cylinder exhaust pipe nozzle; the appropriate installation position of orifice plate should be selected on the gas flow channel; the shock absorber should be set up, the pipeline should be reasonably arranged and the pipe fulcrum should be selected to avoid right angle turning.

DEAR Air Separation Solve YourCauses and elimination of vibration of piston type oxygen compressor in air separation unitYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top