当前位置: Home / Faq / Large air separation FAQ /

Safety measures for routine operation

Safety measures for routine operation
Aug 27, 2024
Author: DEAR AST
Question Reply

1.Enter the work area,wear all kinds of labor protection equipment; check the surrounding working environment; confirm the tools and machines; prohibit the use of defective tools.

 

2.When using the sledge hammer, it is forbidden to wear gloves; it is strictly forbidden to stand in the range of before, after, up, down, left and right of the sledge hammer, and no one is allowed to stand on the opposite side to prevent injury.

 

3.Before welding operation, it is necessary to carefully check whether the electric welding tools used are insulated, whether the primary and secondary wires of the welding machine are damaged, and whether the grounding wire is in good condition; insulating gloves must be worn to prevent the occurrence of electric shock accidents when the welding machine stops power transmission and switches on.

 

4.The safety protection facilities of oxygen cylinder and acetylene cylinder should be complete and reliable. When working, the distance between oxygen cylinder and acetylene cylinder should be more than 5 meters; acetylene cylinder should not be put down for use; oxygen cylinder and acetylene cylinder should not be mixed; throwing, rolling and impact are strictly prohibited during loading and unloading; there should be no oil stain on the bottle mouth and body; the upper part of oxygen and acetylene cylinder should be exposed to the sun.

 

5.It is strictly forbidden to use lifting equipment to lift oxygen cylinder and acetylene cylinder, and hanging cage should be used. The oxygen cylinder and acetylene cylinder must be placed 10 meters away from the hotwork It is strictly forbidden to place the oxygen cylinder and acetylene cylinder under the hot work position and other places close to the fire source to avoid explosion.

 

6.When using tricycles and tractors to transport tools, materials and spare parts,the drivers must hold a motor vehicle driver's license before driving. During driving, should strictly abide by the traffic rules. The speed should not be too fast, and the tractor is forbidden to carry people.

DEAR Air Separation Solve YourSafety measures for routine operationYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
What precautions should be taken when designing a complete set of air separation equipment?
2024.11.22
In case of sudden power failure during the operation of small air separation unit, the following steps should be followed:   First, open the vent valve (anti surge valve) of air compressor to prevent the air compressor from surging and causing the air compressor to reverse due to air backflow;   Then check whether the molecular sieve adsorber switch should be interlocked to close, if not, it should be man...
2024.11.21
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top