The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does...
The reflux liquid in the upper column of the distillation column is throttled by the lower column to the liquid air and liquid nitrogen of the upper c...
Liquid air separation equipment is an air separation device that directly produces liquid oxygen, nitrogen and other liquid products. Some liquid air ...
The working pressure of the high-pressure oxygen compressor used for filling bottles is high, and it is easy to cause cylinder burning accidents due t...
At the installation site of the air separation plant, we may see a variety of operation methods. We may be a little surprised when we first see it. We...
The expansion air volume entering the upper tower increases, and the reflux ratio of the distillation section decreases correspondingly. In order to a...
Leakage is the easiest failure of regulating valve during operation. Some leak at the welding place, and some leak at the sealing place of the stuffin...
The most likely leakage of switching heat exchanger is the welding line, especially the joint of the head and the pipeline. Most of the causes of leak...
1) The station can only be built after the review and approval of relevant departments according to the regulations on the safety management of chemic...
On the one hand, the expansion heat exchanger is to reduce the temperature of the air after expansion by utilizing the cooling amount of the sewage ni...
Reducing the high pressure of small air separation equipment with medium pressure expansion machine can reduce the energy consumption of air separatio...
Nitrogen-water precooler is generally installed in all low-pressure air separation plant. It mainly uses the unsaturation of the water in the nitrogen...