The new small medium-pressure air separation plant adopts the turbine expander, which reduces the working pressure and saves energy consumption. Then,...
After the argon fraction is extracted from the top Tower, it enters into the crude argon tower and conducts the separation of oxygen and argon by the ...
Liquid oxygen is a strong combustion-supporting substance, and the pressure is very high when the gasification bottle is filled, so special safety mea...
As a kind of electrical equipment, electric heater should pay attention to personal safety and equipment safety when operating. Specifically:1) operat...
Overpressure on the tower is very dangerous. If it is not handled in time, it will cause explosion on the tower. The main reason for the sudden rise o...
The working pressure of all low pressure air separation plant is about 0.6MPa, therefore, the refrigerating capacity of throttling effect is very smal...
Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit...
Before starting, slowly open the upper and lower valves of the liquid level and liquid oxygen level gauge, check the liquid oxygen level, and decide t...
The purification process of the molecular sieve is that before the compressed air enters into the cold box, it should first go through the molecular s...
Air is a mixed gas, and the gas separation process cannot be carried out spontaneously. In order to realize the separation of oxygen and nitrogen, wor...
When the air volume decreases, both the rising steam volume and the recirculation fluid volume in the tower decrease, but the recirculation ratio can ...
In the process of production, indicators such as the purity of oxygen products is not less than 99.5%, the purity of nitrogen is not less than 99.99%,...
