After 1990s, the specifications of imported air separation unit increased to 20000m³/h and above, mostly from Linde and French Air Liquide, and also A...
How to avoid cavitation in centrifugal liquid oxygen pumps during air separation operation and maintenance?...
The load regulation range of low pressure air separation unit is related to the regulating performance of feed air compressor, the regulating performa...
How to determine if the pressure at the booster end of the air separation equipment expander is normal?...
The site should be carefully checked for the chiller type and evaporator design pressure. It is not possible to use the water inlet as a water outlet ...
The air is mainly composed of 78.03% nitrogen and 20.93% oxygen and other gases. Air separation is to cool the air to a certain low temperature firstl...
Changes in entropy and enthalpy after throttling and expansion...
Why is a high-high interlock set for the water level in the air cooling tower of an air separation unit?...
The liquid air separation plant includes the lower tower, upper tower, condensing evaporator, argon system, main heat exchanger, subcooler, liquefier ...
Approved pressure test specifications and instructions or sketches are available at the test site. for multi-pressure stage equipment, all manual and...
What are the core objectives, key parameters, and targets of load regulation for air separation equipment?...
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak. From the quality point of view, ...
