当前位置: Home / Faq / Air separation parts FAQ /

Air separation equipment air separation equipment has gas-liquid mixing how to solve?

Air separation equipment air separation equipment has gas-liquid mixing how to solve?
Jun 07, 2024
Author: DEAR AST

Air separation equipment may encounter some common technical problems during operation, and these problems need to be solved with appropriate measures.
Gas-liquid mixing is one of the common failures of air separation equipment, which may lead to unstable performance such as fluctuation, offset and noise. The reason for this may be due to the wear and tear or clogging of certain parts in the system, such as piping, valves, condensers, dryers, etc.
Solution: 1. Check the gas-liquid separator in the equipment to ensure that it is working properly. 2. Check whether there are foreign substances or blockages in the pipeline, and clean it in time. 3. Replace the damaged parts and ensure that they are functioning normally.
The technical problems of air separation equipment are varied, but most of them are related to the operating conditions of the equipment, the state of the components, operation and maintenance, and other factors. In order to effectively prevent and solve these problems, it is recommended to regularly check and maintain the equipment to ensure that it is in good working condition. It can effectively reduce the technical problems of air separation equipment and improve the operational efficiency and reliability of the equipment.

DEAR Air Separation Solve YourAir separation equipment air separation equipment has gas-liquid mixing how to solve?You can also learn about otherAir separation parts FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top