当前位置: Home / Faq / Small air separation FAQ /

Shaft seal of expander of small air separation plant

Shaft seal of expander of small air separation plant
Feb 21, 2023
Author: DEAR AST

In order to prevent the low temperature gas leakage of the expander, reduce the refrigeration capacity of the expander, and cause the lubricating oil freezing accident of the expander bearing, the expander should have a tight shaft seal. At present, the commonly used shaft seal forms include labyrinth seal and graphite ring seal. In order to ensure that the lubricating oil does not leak and the cold air does not leak, the labyrinth seal is generally divided into two sections, with the seal gas flowing in the middle. The graphite sealed by graphite ring has self-lubricating function and small sealing clearance. However, in order to facilitate the disassembly and protection of graphite,. The graphite ring needs to be installed in the stuffing box.

The start-up, commissioning and stable operation of DEAR air separation equipment are not only related to the quality of the equipment itself, but also closely related to the level and experience of field operators. When problems are encountered on the site and conventional methods such as telephone and fax are used to seek technical support, due to the limited information transmitted, technical personnel are far away from the site, unable to fully and timely grasp the site operation, affecting the effective solution of the problem. Deere's remote internet technology is based on the on-site DCS technology, which develops a system for on-site DCS data acquisition, transmission through the internet, and remote real-time monitoring, so as to achieve timely and comprehensive access to on-site operating parameters at the remote end, and provide fast and timely technical support for the site.

DEAR Air Separation Solve YourShaft seal of expander of small air separation plantYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
 The purpose of the blowing is to clean out the residual slag, aluminium chips and other debris from the piping and vessels. the air source for blowing is provided by the turbine compressor, and the air cooling tower must be activated. 3. blowing principle, first outside the tower, after the tower, blowing brush to be one after another, in the blowing with the air pressure: low pressure system. Should be maintained at 40 a 50kpa high pressure system: should be maintained at 250 ~ 400k...
2025.07.23
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak.   From the quality point of view, when the sealing pressure is too high, there will be gas leakage into the pump through the labyrinth seal, resulting in the impeller with gas or even idling, resulting in liquid injection or pressure drop; when the air pressure before sealing is too low, there will be liquid oxygen leakage.   From the quantity point of view, when (p1-p3...
2025.07.22
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top