当前位置: Home / Faq / Liquefied air separation FAQ /

Use of X-ray machine in air separation equipment

Use of X-ray machine in air separation equipment
Feb 08, 2023
Author: DEAR AST

According to the use performance, X-ray machines can be divided into directional X-ray machines, circumferential X-ray machines and pipeline crawlers. The directional X-ray machine is the most widely used X-ray machine, and its head produces a cone angle with an X-ray direction of about 40 degrees. The X-rays produced by the circumferential X-ray machine radiate to 360 degrees, mainly used for shooting large diameter pipes and circumferential welds. The crawler is an X-ray machine installed on the crawler device designed to solve the problem of shooting the circumferential weld of long pipes.

DEAR Air Separation has stepped forward on the road of energy-saving air separation, and the road is getting wider and wider. After 11000 grade energy-saving air separation has been successfully put into the market and achieved good results, Deere Design and Research Institute has launched the design and development of 30000 grade energy-saving air separation. The main feature of 30000 grade air separation is high energy consumption, which makes it reduce energy consumption. It is a new challenge for designers. Through many research and development experiments, Deere Design and Research Institute boldly adopted various methods such as changing the gas processing capacity, increasing the equipment barrel diameter, and designing energy-saving multi-layer main cooling. Through the application of a number of energy-saving technologies, it successfully achieved the test scheme of 30000 grade air separation energy consumption reduction, And apply it widely.

DEAR Air Separation Solve YourUse of X-ray machine in air separation equipmentYou can also learn about otherLiquefied air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
 The purpose of the blowing is to clean out the residual slag, aluminium chips and other debris from the piping and vessels. the air source for blowing is provided by the turbine compressor, and the air cooling tower must be activated. 3. blowing principle, first outside the tower, after the tower, blowing brush to be one after another, in the blowing with the air pressure: low pressure system. Should be maintained at 40 a 50kpa high pressure system: should be maintained at 250 ~ 400k...
2025.07.23
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak.   From the quality point of view, when the sealing pressure is too high, there will be gas leakage into the pump through the labyrinth seal, resulting in the impeller with gas or even idling, resulting in liquid injection or pressure drop; when the air pressure before sealing is too low, there will be liquid oxygen leakage.   From the quantity point of view, when (p1-p3...
2025.07.22
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top