当前位置: Home / Faq / High purity nitrogen air separation FAQ /

What safety precautions should be paid attention to when overhauling the nitrogen water precooling system

What safety precautions should be paid attention to when overhauling the nitrogen water precooling system
Dec 12, 2022
Author: DEAR AST

In the maintenance of nitrogen water precooling system, the most important thing is to prevent nitrogen asphyxiation accidents. In China, there have been several times of death of maintenance workers due to nitrogen asphyxiation. During maintenance, the nitrogen used for the unit is often heated at the same time, and the heated nitrogen often enters the cooling tower through the sewage nitrogen three-way valve, resulting in high nitrogen concentration in the tower.

Therefore, the air cooling tower and water cooling tower shall be separated from the device with blind plates before heating the device; The oxygen content in air cooling tower and water cooling tower shall be analyzed. When the oxygen content is between 19% and 21%, maintenance personnel are allowed to enter; If working in an area with oxygen content lower than 19%, someone must be assigned to monitor and wear an isolation mask (oxygen respirator, long tube mask, etc.).

Whether it is equipment installation or maintenance debugging, DEAR Air Separation can provide customers with comprehensive support. The technical service team composed of experienced and skilled commissioning experts is active in many regions and continuously receives technical skills training. DEAR's equipment maintenance and commissioning is systematic, and strict checklists and agreements need to be filled in to meet the standard delivery requirements.

DEAR Air Separation Solve YourWhat safety precautions should be paid attention to when overhauling the nitrogen water precooling systemYou can also learn about otherHigh purity nitrogen air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top