当前位置: Home / Faq / Small air separation FAQ /

The joint working point of compressors and pipe networks in small air separation units

The joint working point of compressors and pipe networks in small air separation units
May 13, 2022
Author: DEAR AST

The centrifugal compressor and the pipe network form a system of energy supply and use in which the compressor is the energy supplier and the pipe network is the energy user, each of which has its own characteristic curve. When they work together, the energy system can only be balanced when the flow rate through the compressor and the energy head generated by the compressor are equal to the energy of the pipe network and the resistance of the pipe network respectively. This is the intersection of the compressor and pipe network characteristic curve, that is, the joint working point.

DEAR air separation independently developed and manufactured and installed high-purity nitrogen small air separation units KDN-2200, after installation, linkage test, a successful commissioning, the official output of nitrogen products, stable operation after 72 hours, nitrogen output ≥ 2200m³ / h, purity ≤ 100PPm. equipment unit operation of the technical indicators and energy consumption indicators have reached and exceeded the design requirements. The large air separation unit has met and exceeded the design requirements in all technical indicators and energy consumption, and passed the assessment. Both sides signed the acceptance report happily, and the small air separation units, large air separation units and liquid air separation plants of Kaifeng Deere Air Separation were highly evaluated by the customers.上海宝冶集团有限公司-7500

DEAR Air Separation Solve YourThe joint working point of compressors and pipe networks in small air separation unitsYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
1. Before filling with pearlite, the water accumulated on the foundation surface of air separation unit must be removed, dried with hot air, and all manholes shall be closed. 2. When filling pearlite, all containers and pipes in the cold box should be inflated and kept at 50kPa pressure, then slightly open the valve of each meter pipeline, and all thermometers should be electrified to check whether the thermometer cable is damaged during the filling process. 3. The filled pearlite shall not be mixed with combustibles. 4. When filling with pearlite, coarse mesh or pearlite pouring device should be set at the manhole on the top of the cold box to prevent whole bag pearlite from entering the cold box. 5. After the pearlite is filled, the manhole shall be sealed.
2026.08.18
What is the oxygen extraction rate?
2026.08.17
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top