当前位置: Home / Faq / Large air separation FAQ /

Low outlet pressure of piston type liquid oxygen pump for large air separation unit 

Low outlet pressure of piston type liquid oxygen pump for large air separation unit 
May 11, 2022
Author: DEAR AST

Low outlet pressure is one of the common failures of piston type liquid oxygen pumps. The causes of low outlet pressure are usually wrong pump steering, insufficient speed, steam in the pump or a blocked inlet filter. If a piston liquid oxygen pump has a low outlet pressure fault, stop the pump to check the cause. If the steering is wrong, change the motor wiring. If there is steam in the pump, the exhaust line needs to be opened and re-cooled. If the filter is clogged, it needs to be disassembled for cleaning.

The small air separation units,large air separation units and liquid air separation plants Engineering Technology Research Centre, which is based on Dear 、, was established in December 2018. The Engineering Technology Centre has undertaken three research projects at the municipal level or above: "The construction and application research of PLM platform based on workflow in the air separation manufacturing industry" "The development research of automatic selection and parametric design system for small air separation units,large air separation units and liquid air separation plants based on database" "Argon recovery, research on crude argon purification equipment". There are currently six ongoing projects, of which four are declared as science and technology projects.

旋转-DSC03522

 

DEAR Air Separation Solve YourLow outlet pressure of piston type liquid oxygen pump for large air separation unit You can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
 The purpose of the blowing is to clean out the residual slag, aluminium chips and other debris from the piping and vessels. the air source for blowing is provided by the turbine compressor, and the air cooling tower must be activated. 3. blowing principle, first outside the tower, after the tower, blowing brush to be one after another, in the blowing with the air pressure: low pressure system. Should be maintained at 40 a 50kpa high pressure system: should be maintained at 250 ~ 400k...
2025.07.23
Due to improper adjustment of seal gas pressure during operation, liquid oxygen pump can not pump liquid or leak.   From the quality point of view, when the sealing pressure is too high, there will be gas leakage into the pump through the labyrinth seal, resulting in the impeller with gas or even idling, resulting in liquid injection or pressure drop; when the air pressure before sealing is too low, there will be liquid oxygen leakage.   From the quantity point of view, when (p1-p3...
2025.07.22
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top