当前位置: Home / Faq / Large air separation FAQ /

Tpes of weld defects in large air separation unit cast steel parts

Tpes of weld defects in large air separation unit cast steel parts
May 07, 2022
Author: DEAR AST

ypes of weld defects in air separation equipment cast steel parts

The morphology of cast steel defects on radiographs differs from that of welding defects, and the correct identification distinguishes the types of defects

 Inclusions

1 Metal inclusions

Metal inclusions are mainly mixed in the casting metal melt in other kinds of metal pieces. It has a certain geometry, size of density and atomic number compared to the casting metal. Its image may appear as a lower or higher blackness than the background blackness, the image often has a flaky image, the blackness of the entire image is more consistent.

2 Slagging

Slag comes from the internal reaction products of the molten metal and the slag formed and separated during the melting process, the residue of the melt, the dislodged casting material, etc. The basic shape of the image on the negative is a granular black spot distributed in a certain area. The size and shape of the particles are different, often appearing as small flake images, the outline of the image is relatively clear, and the blackness of the image differs greatly from the background blackness.

3 Trachoma

A trachoma may be extremely irregular in the overall shape of the image on the negative, but the image blackness has a granular character, especially at the edge of the image.

The quality of the cast steel parts manufactured by Deere Air is up to standard.

 

 

DEAR Air Separation Solve YourTpes of weld defects in large air separation unit cast steel partsYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In case of sudden power failure during the operation of small air separation unit, the following steps should be followed:   First, open the vent valve (anti surge valve) of air compressor to prevent the air compressor from surging and causing the air compressor to reverse due to air backflow;   Then check whether the molecular sieve adsorber switch should be interlocked to close, if not, it should be man...
2024.11.21
How is the ratio of individual gases adjusted in an air separation plant?
2024.11.20
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top