当前位置: Home / Faq / Small air separation FAQ /

Safety hazards of valves for oxygen in small air separation units

Safety hazards of valves for oxygen in small air separation units
Apr 15, 2022
Author: DEAR AST

Oxygen (including liquid oxygen) is one of the main products of small air separation units, but also a strong accelerant and strong oxidant. Grease, fibres and metals can become combustible in a high oxygen concentration. Once the valve housing for oxygen leaks out, oxygen leakage may lead to deflagration or explosion.

Valves for oxygen in small air separation units as well as cryogenic valves require non-destructive testing of the pressure-bearing parts of the valve body for technical requirements. For the valve cast steel parts common types of defects and structural characteristics of the valve body, the new valve cast steel parts radiographic inspection technology measures and negative assessment methods of defect detection effect was satisfactory.

Dear air separation small air separation unit is a kind of liquid air separation system, which uses air as raw material, with compression cycle depth freezing method of air into a liquid state, and then after distillation, from the liquid air to gradually separate the production of oxygen, nitrogen and argon and other inert gases.

上海宝冶集团有限公司-7500

DEAR Air Separation Solve YourSafety hazards of valves for oxygen in small air separation unitsYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Screw compressor is a positive displacement compressor from the mechanical type, which is composed of the driving rotor and driven rotor, the main body and a pair of synchronous gears. Therefore, the common faults of screw compressor are as follows: 1. The bearing is burnt out. Because of the foreign matter in the oil system, the oil pressure and the quality of the oil are reduced, resulting in the bearing burning out. The main treatment methods are: check the oil supply system; clean the oil filter and the cooling pipe of the oil cooler; check and adjust the oil pressure regulating valve; test the oil quality, and replace the oil when it is not good; check and deal with the oil leakage points. 2. The rotor is burnt out. When foreign matters enter into the compressed medium system, the temperature of the rotor rises, the temperature of the cooling oil of the rotor increases due to the high temperature of the inhaled medium, and the compression ratio increases, which may cause the
2026.03.20
Why only cryogenic air separation equipment can be selected for large industrial gas?
2026.03.19
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top