当前位置: Home / Faq / Small air separation FAQ /

PSA gas separation technology in small air separation unit

PSA gas separation technology in small air separation unit
Jan 25, 2022
Author: DEAR AST

In recent years, pressure swing adsorption (PSA) gas separation technology has been widely used in petroleum, chemical, steel, metallurgy, electronics, medical and environmental protection fields due to its easy operation, room temperature operation, low energy consumption, high degree of automation and environmental friendliness. The core of the VPS device is the adsorbent, a significant feature of the adsorbent is that the adsorption capacity of different gas components is different under the same conditions, with selective adsorption; and the adsorption capacity increases as the adsorption pressure rises, and decreases as the adsorption pressure decreases, the adsorption pressure gradually desorbs the material adsorbed at higher pressure. It is this characteristic of adsorbents that is used in VPS small air separation units to achieve gas separation and continuous production.

 

Dear Air Separation cooperates with the world's top institutions to jointly research and develop the VPS gas separation technology, and has established joint laboratories with CAS, XPTC and XJTU, as well as a provincial engineering technology research centre, and has been awarded the national "small giant" enterprise.

梅花项目1

DEAR Air Separation Solve YourPSA gas separation technology in small air separation unitYou can also learn about otherSmall air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In medium and large air separation plants, the purification system is an important part when separating oxygen, nitrogen and argon from air. The purification system commonly uses molecular sieve adsorbent to adsorb moisture, carbon dioxide, hydrocarbons, etc. in the air. The molecular sieve purification system plays an important role in the air separation equipment process to ensure safety. The molecular sieve purification system is generally composed of adsorber, electric heater, pipeline, val...
2025.12.12
When the exhaust temperature of the piston compressor is higher than the design value, the most direct impact is that the lubricating oil is carbonized, which leads to the compressor parts burned out because of not getting good lubrication. If the temperature of the compressor is too high during actual operation, the cause should be analyzed in time and corresponding preventive measures should be taken. The following methods can be used for reference in practice. 1. Reducing the inlet air temperature can directly reduce the exhaust temperature. Check the intercooler to ensure the cooling effect of the intercooler. 2. The installation of the valve and the selection of the spring should be standardized to ensure the normal operation of the valve and minimize the loss of inlet and outlet pressure. 3. Strengthen the cooling of cylinder to ensure the normal compression process index. 4. Internal leakage is the main reason for the increase of exhaust temperature. 5.For multist
2025.12.11
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top