With a certain amount of adsorbent, the height of the adsorbent must not be less than the length of the adsorption zone. This is because when the adsorbent bed height is lower than the length of the adsorption zone, the adsorber will be switched on and the adsorption capacity will be small or even zero. At this point it is necessary to reduce the adsorption cross section and increase the bed height to increase the adsorption capacity. But this in turn will cause the gas flow rate to increase, if the flow rate is too fast, the gas residence time is less than the adsorption time, the adsorption capacity will also drop to zero. Therefore the adsorber should not only have sufficient height, but also sufficient cross-sectional area.
Dear Air Separation with comprehensive strength to build small air separation units and large air separation units, rely on the integrity of the corporate character to win rich customer resources. The ten times of cooperation between Dear Air Separation and Hebei Anfeng Steel and the eleven times of signing by Linyi Iron and Steel Group witness the common progress, common growth, common strength and win-win cooperation between the two sides.
