当前位置: Home / Faq / Liquefied air separation FAQ /

Minimum gas-liquid ratio in liquid air separation plant

Minimum gas-liquid ratio in liquid air separation plant
Feb 11, 2025
Author: DEAR AST

In fact, reflux ratio is a conventional saying. In practical calculation, it is divided into liquid gas ratio in distillation section and gas-liquid ratio in stripping section. The minimum reflux ratio is of course the same. When the number of trays and reflux ratio determine the purity of distillation products, the actual meaning is that the gas-liquid ratio of the stripping section and the number of trays in the stripping section determine the purity of high boiling point distillation products. The purity of low boiling point products is determined by the ratio of liquid to gas and the number of plates in the distillation section.

 

Now take the minimum gas-liquid ratio of the stripping section as an example to illustrate the calculation of the minimum reflux ratio. First, let's explain what the minimum gas-liquid ratio means. The first is infinite plate number, the second is pure high boiling point product, and the third is infinitesimal distillation driving force. It can be concluded from the above situation that the composition of the rising gas at the bottom of the stripping section is pure high boiling component without low boiling component, and the composition of the gas phase and liquid phase at the top of the stripping section is the composition of the distillation raw material and its equilibrium liquid phase.

DEAR Air Separation focuses on R & D, manufacturing and installation of various complete sets of air separation unit, and provides comprehensive services such as gas investment, EPC project contracting, unit operation management and bioenergy. DEAR Air Separation has the ability to design and produce more than 30 sets of large and medium-sized air separation unit annually, and has successfully served more than 1000 customers around the world.

 

Spend a lot of money to build intelligent production workshop, ensure product quality close to zero defects, improve the accuracy of biogas purification unit, shorten the scheduled cycle. At the same time, it has a number of patented technologies, of which two ultra-low pressure discharge energy-saving patents belong to the domestic leading level, which can reduce the energy consumption of biogas purification unit by 5% - 15%, and save operating costs.

DSC03519

 

Science and technology innovation + management innovation initiated the reform of the air separation industry mode, and developed the remote intelligent monitoring system with the help of Internet technology. Realize remote control, automatic data acquisition and analysis and other functions to achieve early detection and early warning of unit failure.

DEAR Air Separation Solve YourMinimum gas-liquid ratio in liquid air separation plantYou can also learn about otherLiquefied air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In the air separation unit, low-temperature liquid is transported by centrifugal cryogenic pump. In order to ensure the reliable operation of the equipment, two sets of low-temperature pumps are generally equipped, one for use and one for standby. During normal operation, the main pump runs at full load, and the standby pump is in standby state under low load operation. Since the working medium temperature of cryogenic liquid pump is about -180°C, the working pressure is very high, and the pump body is installed in the cold box. When the pump fails, it is extremely difficult to maintain. Therefore, how to maintain the stable and reliable operation of cryogenic liquid pump is of great significance.
2025.09.03
The brief introduction of the air filter and air compressor in this process is the same as that of the chilled nitrogen production process. 1. Cold dryer: it is an air separation equipment used to reduce the temperature of compressed air before entering the air drying purifier to extract oil and water. It usually adopts post cooler with the structure of column pipe type, casing type, cooling sheet type and so on. 2. Oil-water separator: its function is to separate the oil and moisture contained in the compressed air and make the compressed air get Primary purification. 3. Air drying purifier: Compressed air still contains certain moisture after passing through the post cooler, and its content depends on the temperature of the air. The drying process of compressed air generally adopts molecular sieve absorption method and freeze drying method. 4. Pressure conversion absorption nitrogen generation device: the adsorbents used are usually 5A Molecular sieve or carbon molecular sieve, an...
2025.09.02
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top