当前位置: Home / Faq / Air separation parts FAQ /

Air cooling column start-up process

Air cooling column start-up process
Nov 16, 2021
Author: DEAR AST

When the starts, it is necessary to ventilate before the water pump is started.

 

The pressure of air in the column before inflation is atmospheric pressure. When the air with pressure of 0.5MPa is introduced into the column, the pressure will suddenly decrease due to the expansion of volume and the air flow speed will increase rapidly, and its impact carrying effect is very strong. At this time, if the cooling water has been sprayed, the air is very easy to take water when it is out of the air cooling column. Therefore, it is required to inflate the column first, and start the water supply spray of the water pump after the pressure increases and the air flow is stable. Secondly, if the water pump is opened first, the water level in the air cooling column is too high, even exceeds the elevation of the air inlet pipe, the resistance of the outlet pipeline of the air compressor increases, which causes the turbine air compressor to surge.

0-1

DEAR Air Separation Solve YourAir cooling column start-up processYou can also learn about otherAir separation parts FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
Small air separation unit is the unit that separates air into oxygen and other gases by first compressing and cooling the air into a liquid state and then using the characteristic that oxygen has a different boiling point to other gases in the air to obtain oxygen and liquid oxygen by evaporation and separation, as well as other rare gases as required.Liquid oxygen is produced using the cryogenic separation of air. The basic principle is to u...
2025.04.02
The pressure relief of molecular sieve in the purification system is generally rapid in the early stage, not complete and running overtime in the later stage. The pressure relief degree is adjusted by the manual stop valve in front of the pressure relief valve. Through practical adjustment, no matter how it is adjusted, the pressure relief in front is fast, or the pressure can not be exhausted. It is suggested that the valve positioner should be added to the automatic pressure relief valve, and the pressure linear adjustment should be programmed, so that the impact on molecular sieve will be much smaller.
2025.04.01
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top