当前位置: Home / Faq / Large air separation FAQ /

Safety measures for working at height

Safety measures for working at height
Jan 15, 2025
Author: DEAR AST
Question Reply

1.When working at a height of more than 2 meters or multilevelcross operation, special personnel shall be assigned to guard or contact with each other, and it is strictly forbidden to command by more than one person.

 

2.The safety belt must be worn when working at a height of more than 2 meters, and it should be hung high and low. It is forbidden to hang the safety belt on the maintenance objects, on the pipelines and equipment (including electrical) of various dangerous media, and it is forbidden to drag the safety belt on the ground. It is strictly forbidden to use nylon material safety belt in high-temperature area or welding operation, and the flame-retardant and high-temperature resistant safety belt should be selected.

 

3.If there are high falling objects, the articles should be cleaned up in time, or the falling prevention measures should be added.

 

4.The safety rope should be lowered from the top of the silo as the hanging point of the safety belt for the high-altitude operation inside the silo. It is strictly prohibited to hang it on the scaffold.

 

5.Tools and instruments must be put into the wallet or tool bag to prevent falling objects from hurting people. It is strictly forbidden to throw tools, materials and other objects. Tools, materials and spare parts on the high-altitude platform must be placed stably. After the maintenance, the platform must be cleaned to prevent falling objects from injuring people.

 

6.The upper operator must ensure the safety of the lower operator.

DEAR Air Separation Solve YourSafety measures for working at heightYou can also learn about otherLarge air separation FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
The liquefaction of gases can be divided into forward and reverse cycles. The forward cycle process is the absorption of heat from the higher temperature external heat source and the release of heat to the lower temperature external heat source. The reverse cycle is when the mass draws heat from a lower temperature external heat source and releases it to a higher temperature external heat source. The forward cycle converts heat energy into mechanical energy and the reverse cycle converts mechani...
2025.09.26
Distillation is using the different boiling points of the two substances to condense the mixed steam and vaporize the mixed liquid repeatedly to achieve gas separation. For a mixed liquid composed of two substances with different boiling points, when the heat absorption part evaporates, the volatile components will evaporate more, while the mixed steam will give off heat and partially condense, the non volatile components will condense more. If the saturated steam with higher temperature is mixed with the saturated liquid with lower temperature, the steam will release heat and partially condense, and the liquid will absorb heat part of it evaporates. If after a round of partial evaporation and partial condensation, the steam and liquid with higher concentration will contact with the steam and liquid with different temperature respectively, and then partial condensation and partial evaporation will occur again. This process will be repeated for many times, and finally gas separation
2025.09.25
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top