Deep cold air separation equipment technology

(1) argon arc welder must have a pressure vessel welder qualification certificate, no permit personnel are strictly prohibited to weld. (2) in order to effectively control the speed of heating of the welded parts, should be used as far as possible to break the arc method of welding, welding wire diameter selected towel 3mm, while welding current should be given strict control, such as towel 12 * 2 instrumentation pipe joints recommended to use 60 ~ 80 amps welding current, the maximum should no...

Another part of the nitrogen vaporized in the liquefier is heated up to a certain temperature in the high pressure heat exchanger and pumped out to the low pressure nitrogen press, the nitrogen separated by the gas-liquid separator is also heated up by the high pressure heat exchanger and then goes to the low pressure nitrogen press, compressed to a certain pressure by the low pressure nitrogen press and then back to the high pressure heat exchanger for heat exchange with liquid air separat...