The process of stripping is a process of continuous exchange between the high boiling point components in the rising gas and the low boiling point com...
Small air separation unit in place before the strength test and gas-tightness test provisions. First, if the manufacturer has made strength test a...
What are the basic methods for adjusting the purity of various gases in air separation equipment?...
1. When working at a height of more than 2 meters or multilevel cross operation, special personnel shall be assigned to guard or contact with each oth...
In the small air separation unit, when gas or liquid flows through a shrinkage hole or valve in the pipeline, the flow will be hindered, and the fl...
1. The requirements of molecular sieve adsorber, electric heater and other equipment in place are the same as those of air cooling column of pre cooli...
Air separation unit not only has the distillation and separation process of air under the condition of deep cooling, but also the process of keeping t...
How to regulate the cooling capacity of an air separation unit?...
How is the ratio of individual gases adjusted in an air separation plant?...
Cavitation phenomenon of centrifugal liquid oxygen pump...
In the operation, the methods to improve the oxygen extraction rate are as follows: when the potential of upper column distillation is allowed, all th...
