1. Workers must wear safety helmets properly when entering the construction site, because the construction site is often chaotic. Some equipment insta...
Leakage is the easiest failure of regulating valve during operation. Some leak at the welding place, and some leak at the sealing place of the stuffin...
When the cryogenic method is used for air separation, the whole process is carried out in closed containers and pipelines from the air compressor to t...
The most common failure of the liquid oxygen pump is the leakage of the seal. For the structure of mechanical seal, the key is the bad contact of the ...
In the switching heat exchanger, moisture and carbon dioxide cannot be completely and thoroughly removed. Although the remaining amount is very small,...
Reducing the high pressure of small air separation equipment with medium pressure expansion machine can reduce the energy consumption of air separatio...
Nitrogen-water precooler is generally installed in all low-pressure air separation plant. It mainly uses the unsaturation of the water in the nitrogen...
Small air separation equipment consists of air compressor, purifier, air separation Tower, expander, oxygen compressor and other main parts. Before st...
The newly installed distillation column must be thoroughly heated and blown off before starting and returning to work after long-term parking. After b...
Since the first set of high-purity nitrogen air separation equipment was developed and produced in 1978 in China's air separation market, the demand o...
The spacing between the tower plates determines the height of the whole distillation column. Therefore, it is hoped that the spacing between the tower...
To eliminate the vibration of the compressor, we generally start from the following ways: 1. The static balance and dynamic balance of moving parts s...
