There must be rising steam and downstream liquid during the rectification process. Condensation evaporator is the bond connecting the upper and lower ...
Before closing the throttle valve, the conditions for closing the valve should be created: the liquid oxygen liquid level is close to the normal liqui...
The main dangerous and harmful factors in workshop workplace are: electric shock, mechanical injury, lifting injury, burning, falling from high places...
Phase cooling method is one of the start-up operating force methods of the air separation plant which uses switching heat exchanger to self-remove moi...
In the normal operation of the crude argon Tower, sometimes the resistance drop, the argon content drop and the oxygen content increase of the crude a...
The main components in the air are nitrogen and oxygen. By selecting the adsorbents with different adsorption selectivity for nitrogen and oxygen, the...
Air compressor absorbs the external air and compresses the gas generated through the air dryer and drier. After separating the water in the air, the g...
The running cycle of small-sized air separation plant is shorter than that of large-sized air separation plant, which is because small-sized air separ...
After removing the micro metal particles and dust impurities in the air through the air filter, the air enters the svk20-3s type turbine air compresso...
Liquid appears too early in the liquid purifier, which means that the liquid purifier is connected too early. If the temperature condition of the swit...
The load adjustment range of low pressure air separation plant is related to the adjustment performance of raw material air compressor, the adjustment...
The actual running current of 132kw-8 electric motor is 220A ~ 240A, four air compressors share one air storage tank, and the actual pressure required...
