Cooling is a common name in refrigeration, refrigeration is to get lower temperature than the surrounding air, compared with the surrounding air, it h...
The air pressure test on site is mainly to check the air tightness of the air separation plant. The following problems should be paid attention to dur...
Before closing the throttle valve, the conditions for closing the valve should be created: the liquid oxygen liquid level is close to the normal liqui...
The air passes through the cooler or the switching heat exchanger. As the temperature decreases continuously, the moisture gradually flows out and dep...
The main dangerous and harmful factors in workshop workplace are: electric shock, mechanical injury, lifting injury, burning, falling from high places...
In the normal operation of the crude argon Tower, sometimes the resistance drop, the argon content drop and the oxygen content increase of the crude a...
Air compressor absorbs the external air and compresses the gas generated through the air dryer and drier. After separating the water in the air, the g...
Carbon molecular sieve (CMS) is a new type of non-polar adsorbents, which has the performance of absorbing oxygen molecules in the air under normal te...
If the automatic adjustment system of the liquid level of the air cooling tower fails, it is easy to cause water accidents of the air separation tower...
In the whole low-pressure air separation process, some are equipped with a liquid purifier, and some are equipped with two or even three liquidators, ...
Molecular sieve (also known as synthetic zeolite) is a kind of microporous crystals made up of SiO and AIO sihedron and the frame structure. There are...
Booster turbine expansion machine, the working medium of this unit is pressurized by the booster first, and then enters into the main heat exchanger a...
