The air pressure test on site is mainly to check the air tightness of the air separation plant. The following problems should be paid attention to dur...
The air passes through the cooler or the switching heat exchanger. As the temperature decreases continuously, the moisture gradually flows out and dep...
Oxygen (O2) is a colorless, odorless and odorless gas. The molecular weight is 32. The relative density is 1.429 (Air = 1 ). The melting point is-218....
The main dangerous and harmful factors in workshop workplace are: electric shock, mechanical injury, lifting injury, burning, falling from high places...
Pressure dew point: after the wet air is compressed, the density of water vapor increases and the temperature also rises. When the compressed air cool...
Phase cooling method is one of the start-up operating force methods of the air separation plant which uses switching heat exchanger to self-remove moi...
I. Start-up operation should be conducted according to the following requirements: 1. Water should be supplied to the cooling water system and the coo...
At present, our government attaches great importance to the work of energy saving and emission reduction, and many binding targets such as China's ene...
Cause and elimination method of oil leakage failure of air compressor of air separation plant: There are three types of common failures in the use of...
Before the automatic valve is installed in the automatic valve box, it must be disassembled and washed clean, and the oil must be removed with clean a...
After removing the micro metal particles and dust impurities in the air through the air filter, the air enters the svk20-3s type turbine air compresso...
Before filling the molecular sieve, check that the sieve bed can not leak the molecular sieve, otherwise it should be handled. Oil and other sundries ...
