Leakage is the easiest failure of regulating valve during operation. Some leak at the welding place, and some leak at the sealing place of the stuffin...
The three-point temperature of the low temperature of the air separation tower is: T3 temperature refers to the temperature before the high pressure a...
Air cooling tower is also a hybrid heat exchanger. In order to make the cooling water fully contact and strongly mix with the air to enlarge the heat ...
Since the first set of high-purity nitrogen air separation equipment was developed and produced in 1978 in China's air separation market, the demand o...
The process of using nitrogen as the working medium of expansion machine is called nitrogen expansion. Nitrogen expansion is divided into pure nitroge...
The low temperature valve is installed at normal temperature and works at low temperature, with a wide range of temperature variation. If the design a...
The pressure value measured by the pressure gauge reflects the pressure level, but it is not the actual pressure. According to the working principle o...
The air passes through the cooler or the switching heat exchanger. As the temperature decreases continuously, the moisture gradually flows out and dep...
Air compressor absorbs the external air and compresses the gas generated through the air dryer and drier. After separating the water in the air, the g...
Core tips: answer: 1. the manufacture, inspection and acceptance of the lower distillation column comply with the provisions of JB/T2549-1994 "aluminu...
There are many factors that affect the air displacement of centrifugal compressor. Except for the connection with design, manufacture and installation...
The actual running current of 132kw-8 electric motor is 220A ~ 240A, four air compressors share one air storage tank, and the actual pressure required...
