Deere air separation has been deeply engaged in the air separation industry for many years. It has complete qualifications for the design, manufacture...
It should contact with the front and rear processes when the piston compressor is ready to stop, we should pay attention to the following sequence: fi...
There are four kinds of commonly used thermometers in air separation plant: industrial internal standard glass thermometer, thermocouple thermometer, ...
Users equipped with piston compressors often encounter the phenomenon of pipeline displacement, support deformation and severe noise caused by pipelin...
According to a DEAR air separation user, during the operation of a set of air separation plant that has been in operation for 5 years, it is found tha...
The design of the internal structure of the adsorber: the design of the internal structure of the adsorber includes the determination of the bed layer...
Almost all motors commonly used in the air separation plant are three-phase AC motors. Three-phase AC motor can be divided into asynchronous motor and...
In general, the liquefaction temperature of nitrogen is higher than that of oxygen, but why can the condensation evaporator between the upper and lowe...
If the passing capacity of the liquid-air regulating valve selected in the design is too small, or it is replaced with the liquid nitrogen regulating ...
Internal compression air separation process is a process form in which liquid products are pressurized by liquid pump in the cold box, and then sent o...
The start-up of the air separation plant includes three stages: cooling, hydrops and purification. For a certain equipment, the start-up time is rough...
1. Air separation plant and its performance characteristics 1.1 air separation plant the air separation plant uses air as the raw material, and conver...
