The liquid oxygen pump is a kind of low temperature liquid pump. It is used as the liquid oxygen circulating pump in the main condensing evaporator in...
In the air separation unit of molecular sieve adsorption purification process, after the air is compressed at the last stage of the air compressor, th...
In the temperature of the forward air into the cooler (hot end temperature, related to the cooling effect of the last cooler of the air compressor or ...
The temperature condition adjustment of the cooler (or switching heat exchanger) is based on the central temperature. The "middle" mentioned here does...
After the argon fraction is extracted from the top Tower, it enters into the crude argon tower and conducts the separation of oxygen and argon by the ...
Saturation temperature and saturation pressure are terms in gas-liquid equilibrium. If it is not filled with liquid in a sealed container, part of liq...
1.Before filling alumina and molecular sieve adsorbent into the adsorber, personnel should be arranged to enter the adsorber to check whether the scre...
Air compressor intermediate cooler is generally shell-tube structure. Water is supplied inside the pipe, and gas is supplied between the pipes, which ...
1. The requirements of molecular sieve adsorber, electric heater and other equipment in place are the same as those of air cooling column of pre cooli...
When the air is out of the air compressor, due to the compression, the moisture in the air is in the saturated state. After the water cooling column d...
In the air separation plant, the purity of oxygen is mainly determined by the working conditions of the distillation column at the upper and lower par...
The forced valve is opened and closed by the air source pressure pushing the piston. Its faults include the faults in the cylinder and the valve body....
