当前位置: Home / Faq / Air separation parts FAQ /

How to ensure the normal operation of liquid oxygen pump

How to ensure the normal operation of liquid oxygen pump
Jun 05, 2025
Author: DEAR AST
Question Reply

The liquid oxygen pump is a kind of low temperature liquid pump. It is used as the liquid oxygen circulating pump in the main condensing evaporator in the internal compressed air separation process to increase the pressure of liquid oxygen and output liquid oxygen.

 

Each set of internal compression process air separation plant is generally equipped with two liquid oxygen pumps, one for operation and one for standby. The operation of the liquid oxygen pump has a great impact on the operation quality of the air separation plant, and plays a key role. How to extend the operation period of the liquid oxygen pump is a subject that every air separation user pays much attention to and explores continuously.

 

After years of working practice, the technical personnel of DEAR air separation summarized the following experiences:

 

1.Before the start-up of the liquid oxygen pump, strict electrical instrument inspection shall be carried out to confirm that the turning gear is normal, and the liquid oxygen pump shall be pre-cooled to ensure that the temperature of impeller, shaft, seal ring and other components of the liquid oxygen pump is cooled to the working temperature before the start-up.

 

2.Strictly control the seal air pressure difference index during operation: the high orlow pressureof seal gas in the high-pressure liquid oxygen pump is very important for the stable operation of the liquid oxygen pump.

 

If the seal gas pressure is too high, the gas entering the pump body will easily lead to gas etching; if the seal gas pressure is too low, the liquid oxygen will easily leak out.

 

3.During the start-up process, it shouldbe paidclose attention to the electric current of the liquid oxygen pump, bearing temperature, seal gas pressure difference, temperature of seal gas and leakage gas and other parameters.

 

When the parameters fluctuate greatly, it should be taken relevant treatment measures in time.

 

4.After pre-cooling of the standby pump, the exhaust valve of the pump body and the blow afterpumpingvalve are slightly opened and in standby state at any time.

 

Through the application of the above methods and the implementation of the optimized operation, the operation cycle of the liquid oxygen pump will be greatly extended, providing a reliable guarantee for the safe operation of the air separation plant.

DEAR Air Separation Solve YourHow to ensure the normal operation of liquid oxygen pumpYou can also learn about otherAir separation parts FAQ about DEAR Air Separation, and solve the problem for you.
Didn’t find the problem encountered?
Please contact live chat or email for quick help.
Related FAQ
More Related FAQ
In the air separation unit, low-temperature liquid is transported by centrifugal cryogenic pump. In order to ensure the reliable operation of the equipment, two sets of low-temperature pumps are generally equipped, one for use and one for standby. During normal operation, the main pump runs at full load, and the standby pump is in standby state under low load operation. Since the working medium temperature of cryogenic liquid pump is about -180°C, the working pressure is very high, and the pump body is installed in the cold box. When the pump fails, it is extremely difficult to maintain. Therefore, how to maintain the stable and reliable operation of cryogenic liquid pump is of great significance.
2025.09.03
The brief introduction of the air filter and air compressor in this process is the same as that of the chilled nitrogen production process. 1. Cold dryer: it is an air separation equipment used to reduce the temperature of compressed air before entering the air drying purifier to extract oil and water. It usually adopts post cooler with the structure of column pipe type, casing type, cooling sheet type and so on. 2. Oil-water separator: its function is to separate the oil and moisture contained in the compressed air and make the compressed air get Primary purification. 3. Air drying purifier: Compressed air still contains certain moisture after passing through the post cooler, and its content depends on the temperature of the air. The drying process of compressed air generally adopts molecular sieve absorption method and freeze drying method. 4. Pressure conversion absorption nitrogen generation device: the adsorbents used are usually 5A Molecular sieve or carbon molecular sieve, an...
2025.09.02
Need more information?
Contact us for more details about our air separation equipment, solutions and services.
Products
  • Large air separation
  • Small air separation
  • High purity nitrogen air separation
  • Liquefaction air separation
  • Complete air separation
  • Biogas purification
  • Air separation parts
Need more information?
Tel:+86-19837850537
© Kaifeng DEAR Air Separation Industry Co., Ltd.. All rights reserved.
Online
Inquiry
Email
Top